TP-Link AC750 Dual Band 4G LTE Router, SIM Slot Unlocked, WAN/LAN port, Removable Wi-Fi Antennas, Compatible with FDD-LTE and TDD-LTE, No Configuration Required, UK Plug, Black (Archer MR200)

Product Information

No internet connection when using TP-Link Wireless 4G LTE Router working as 3G/4G Router Mode(Case 1) 05-17-2023 408800 How to troubleshoot if I have low speed with TP-Link Wireless 4G LTE Router working as 3G 4G Router Mode 10-19-2022 55950 Merge the bootloader and your custom firmware by doing cat MR200_Bootloader.bin Custom_Firmware.bin > ArcherC2V1_tp_recovery.bin for Linux, or copy /b MR200_Bootloader.bin + Custom_Firmware.bin ArcherC2V1_tp_recovery.bin for Windows. Note that the custom firmware must be a SysUpgrade compatible file AC750 Wireless Dual Band Router with an integrated LTE 150Mbps modem (similar to TP-Link M7350 V1). Comes with 4 100Mbps ethernet ports, one can be used as WAN.

Archer MR200 WiFi 4G Router - AC 750, Dual-band - Currys TP-LINK Archer MR200 WiFi 4G Router - AC 750, Dual-band - Currys

Soubory cookie pro nám umožňují analyzovat vaše aktivity na našich webových stránkách za účelem zlepšení a přizpůsobení jejich funkčnosti. Troubleshooting guide of no internet access with TP-Link Wireless 4G LTE Router working as 3G/4G Router Mode 05-17-2023 62273 No internet connection when using TP-Link Wireless 4G LTE Router working as 3G/4G Router Mode(Case 2) 05-17-2023 147400 Creëert dual-band wifi-netwerken met snelheden tot wel 300 Mbps op de 2.4GHz-band en 433 Mbps op de 5GHz-band

Firmware

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

TP-LINK MR200 Archer AC750 4G/LTE WiFi Router with LAN Ports

Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product. Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

To Upgrade

Use a chip writing software, choose the file you made, make sure to enable Erase before Writing as well as Verify Write parameters Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, 8, 8.1, 10, MAC OS, NetWare, UNIX or Linux Connect computer via LAN to the router while it is powered off, use any of the LAN ports, it is recommended to disconnect all other LAN devices before beginning. For these models, we could see WPS/RESET button on the rear panel/the Front Panel. To use WPS function, please push the button for less than 5 seconds, and then the WPS LED will flash; to reset the router, please push the button for at least 10 seconds.

Download for Archer MR200 | TP-Link Australia Download for Archer MR200 | TP-Link Australia

To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device. First prepare the connections between the flash chip and the programmer or Raspberry Pi, refer to Connecting to Flash Chip for more information. Details about the extent of our regulation by the Financial Conduct Authority are available from us on request.It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade. Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. ( Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28) Merge boot + router firmware with your Router Configuration by doing cat BootFW_nomodem.bin Configurations.bin > Firmware.bin on Linux, or copy /b BootFW_nomodem.bin + Configurations.bin Firmware.bin for Windows