Tefal Ultimate Pure Steam Iron, 260g/min Steam Boost, 350ml Water Tank, 3m Power Cord, 3100W, Black and Rose Gold, FV9845

Product Information

The higher the wattage, the faster the iron will reach the desired temperature. Where can I dispose of my appliance at the end of its life span? No, leave the iron to cool down before putting it away and follow the 4 tips: empty out the water remaining in the tank, set the thermostat to the minimum, close the steam control and stand it upright or place it on the base (depending model). Regularly clean the soleplate with a damp, non metallic washing up pad. For easier, non-corrosive cleaning of your iron's soleplate, use a damp sponge on the soleplate while it is still warm.

After use, empty the tank, close the steam control, set the thermostat to minimum and stand the iron upright or place it on the base (depending on model). If your water is very hard, we recommend that you use a maximum of 50% untreated tap water and 50% distilled water available in most shops.The clothes have not been rinsed enough and there is detergent left on them or you have ironed a new item of clothing before washing it. Important: The iron takes longer to cool down than to heat up. We recommend that you start with fabrics to be ironed at a low temperature. Which water should I use?

Reposition the anti-calc valve into your iron. Warning! Never touch the end of the anti-calc valve. No, you must always unplug the iron before filling it. How can I avoid scratching the soleplate of my iron? The Ultimate Pure FV9845 is the most powerful Tefal steam iron that uses MicroScale filter technolgy to produce pure steam which stops limescale stains* for ultimate and efficent ironing. Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre. Various topics How do I prevent brown spots from the iron appearing on the clothing?There is not enough water in the tank. Fill it up with the quantity indicated in the instructions for use and push spray button several times to fill the system complete. The indicator light keeps going on and off. Remove the anti-scale valve (or set the control to self-clean/autoclean depending on the model). Steam, water and scale deposits will leave the steam chamber through the steam holes and the iron will be clean. It is not designed for the water to be removed completely. It is okay to use or store the iron even with a small amount of water remaining. When storing, please remove as much water as possible and store in an upright position. How do I clean the soleplate? Not all of the steam holes release steam, the smaller holes on the soleplate that look like they might be steam holes are actually designed to assist soleplate glide ability. Why isn't the spray function on my iron working?

Rapid results: This 3100W iron delivers a constant high steam output of 60g/min and a 260g/min boost. See the instructions for use to find out what type of water is appropriate and clean the soleplate from time to time with a damp sponge. What is the right temperature for my clothes? All irons contain a thermostat light. It is normal for the thermostat to turn on and off. It indicates the thermostat is working and your soleplate is being maintained at the desired temperature. If the auto-off light blinks, you must disengage the auto-off function. This is done by gently shaking the iron which will allow the iron to reheat. Why did my iron smoke on first use?Yes and you do not need to fill the tank with water. Set the variable steam control to Dry and set the temperature to suit the type of material (care points •, ••, •••). The board should be perforated to allow the steam to pass through the fibres of the fabric to soften it and make ironing easier. The ironing board cover should also be suitable to allow the flow of steam through. The soleplate of my iron is giving off a yellowish colour that is staining my clothes. If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution. How to better use my product What type of ironing board should I use? Gently shake your iron to reactivate it, the lights should start to flash and then the product should start to heat up.