Joined in 2023 
82 
63 About this deal
As you will have seen in our video, the Luxe 2 provides a great many options, however it may well lead you to buy one or two Phanteks accessories, depending on your chosen configuration. For example you might want a vertical GPU mount or a clever Phanteks Revolt X or Revolt Pro power supply. Ultimate Cooling’ showed off a system with four radiators (480mm at the front, 480mm in the side, 360mm in the roof and 360mm in the floor). If you want to use an air cooler on your CPU, the max height is 195 mm (all products on the market will fit). GPUs up to 503 mm in length are supported, whereas the PSU size limit is not defined (but based on practice you can go up to 200 mm). The case is available in two colour variants: PHANTEKS has also taken traditional air cooling into consideration, enabling the installation of up to x15 120 mm fans. The front has space for four 120- or three 140 mm models, while the rear and roof supports 140- or 120 mm case fans. The motherboard tray supports four 120 mm fans and the bottom of the case allows for three 120- or 140 mm fans. CPU coolers may be up to 195 mm tall. Fan Hub and RGB-LED Lighting I had begun to notice that there was very little variance in CPU load temperatures from enclosure to enclosure, much less than I would anticipate. The GPU temperatures seemed in line with the airflow characteristics of each case, but I was not happy with what I was seeing from the CPU tests, so I evaluated what was going on and found the problem.
The Phanteks Enthoo Pro II doesn’t come with any fans included, which isn’t too surprising given that you’re getting this much chassis at this price point. Every system built in this case will undoubtedly be totally different from another, and the enthusiast who dares take on this case will probably have their own ideas for how to cool their system.The phankteks Enthoo Elite is their best Case ever, I built My PC with that case, and I can tell you: It worths every dollar. Front I/O: 1x USB 3.1 Type-C Gen2, 4x USB 3.0, Microphone, Headphone, Reset Button, D-RGB Mode button, D-RGB Color Button The neat details that are sprinkled through Luxe 2 make it a delight to work with. Phanteks includes a superb powered PWM fan hub and the neatest RGB lighting you could ever hope to see. Enthusiasts will love the ability to drop in a 20mm fill port or drain port with the minimum of hassle. There is a super useful fan hub at the top of the right side of the case making it very easy to route fan cables and the rubber lined spaces inside the case make it super easy to route cables away from the inside which really helps to look neat and tidy. Mi montaje incluye una RL de 280 arriba lo más pegada posible al frontal (lo que den los tubos), se supone que arriba son de 240mm o 360 y no 280 pero se puede. Otra AIO en el lateral de 240mm (para la APU) 3 ventiladores en el frontal y uno arriba junto a la AIO encima de las VRMs y otro en la parte trasera, todos de 140mm para que sean más silenciosos. Supongo que abajo pondré alguno más metiendo aire para aprovechar el filtro de abajo.
The be quiet! Silent Wings 3 fan used with the Scythe Choten CPU Cooler was set to 850 RPM. The Arctic Cooling Twin Turbo II GPU cooler used with the GTX 980 had its fan speed set to 33% (the highest fan speed reached on default curve during open bench stress test). When it comes to hard drives, Phanteks offers tons of possibilities. Included with the chassis are four HDD caddies, which you can also hang from the side of the case in pairs of two. These are incredibly easy to hang up here, as they just slot into place, but they rely fully on gravity to keep them in place. As such, we would only install drives here if you have absolutely no intention of moving your system. In a car, it’d only take one bump for them to drop out of place and fall down, which isn’t something you want happening with your hard drives. The Enthoo 719 from PHANTEKS is a huge PC case for enthusiasts. It is designed for large SSI-EEB and E-ATX motherboards. The Full-Tower offers the possibility of customising the case's interior to meet your personal requirements, even enabling users to install two power supplies or two complete systems under one roof. There are also multiple options when it comes to installing a range of water cooling gear along with two vertically-mounted graphics cards. In short: the Enthoo 719 is ready for anything you care to throw at it. The Features of the PHANTEKS ENTHOO 719 at a Glance: Buyer's Remorse - Authorization to return the unit must be made within 30 days from receipt of product.
Page Not found
Available RIGHT NOW we have the next must have case from Phanteks, The Enthoo 719. This full tower behemoth has been eagerly anticipated since it's first proper appearance at CES in January this year, and boy, have Phanteks delivered a product the enthusiasts wanted! The Enthoo 719 from PHANTEKS is a huge PC case for enthusiasts. It is designed for large SSI-EEB and E-ATX motherboards. The Full-Tower offers the possibility of customising the case's interior to meet your personal requirements, even enabling users to install two power supplies or two complete systems under one roof. There are also multiple options when it comes to installing a range of water cooling gear along with two vertically-mounted graphics cards. In short: the Enthoo 719 is ready for anything you care to throw at it. The rear of the case supports a single 140- or 120 mm model fan. A radiator up to 480 mm can fit onto the motherboard tray. The right side wall offers multiple openings to help improve overall airflow. The bottom of the case on the other hand supports a 360 mm radiator. The roof and the front of the case include openings for fill- and drain ports each with a diameter of 20,5 mm. The case is HUGE and has room for everything I needed now and plenty of future proof features such as support for dual system and additional fittings. For stress testing we use AIDA64 to create the maximum amount of load our CPU and GPU are ever likely to see.
Great Deal 
New Comment