BOSS RC-1 Loop Station Pedal | Industry Standard Simple Looper for Guitar, Bass, Keyboards & More | 24-Segment LED Indicator | 12 Minutes of Record Time | Record, Playback, Overdub, Undo & Redo Loops

Product Information

TC Electronic Ditto Plus: This micro looper offers a whopping 60 minutes of loop time, and the new extended loop mode is revolutionary. The optional FS-7 makes footswitching even simpler and easier! And, its compact size won’t take up much space on your pedal board. Pressing the “A” switch will stop the Rec/Overdub/Play mode. Hold down the “A” switch for two seconds or longer to erase the phrase. By pressing the “B” switch, you can easily undo or redo your phrase. It’s that easy! Specifications Nominal Input Level -20 dBu Input Impedance 1 M ohm Nominal Output Level -20 dBu Output Impedance 1 k ohm Recommended Load Impedance 10 k ohms or greater Maximum Recording Time Approximately 12 minutes Controls Pedal switch Power Supply: Alkaline Battery (9 V, 6LR61), AC Adaptor (sold separately) – Rechargeable Ni-MH batteries cannot be used. And that’s it for the primary features of the BOSS RC-1. It’s a great pedal for a person who just wants a simple looper that gets the job done. We’re not done yet though because I have a few tips for you that are worth sharing. 4 Tips for Using the BOSS RC-1 Loop Station 1) You Can Record A Loop For Up To 12 Minutes

It doesn’t matter if you’re a beginner or a concert touring professional. The RC-1 is a great choice for any guitarist, bassist or keyboardist concerned with usability and simplicity while having lots of fun! What are some applications for the RC-1?The RC-300 is quite a jump up in price over the RC-30, so take a look at what you’ll be creating with your loops and whether it’s worth the extra money or not. Yes, it does tight loops, no gaps or latency, it has all the essential functions and it sounds just fine. The screen changes color to let you know what mode it is in. Here are the different screen colors used and what they mean:

The RC-30 also has inbuilt effects, which can be fun for a while, but most guitarists aren’t likely to use them. The main benefits to the RC-30 is the ability to save up to 99 loops and the control you have over every aspect of the loop. Choosing between the RC-3 and the RC-30 P. Use the Software to create other software, products or technologies unless the Software contains Development Tools as described in Section 6; According to the BOSS Instruction manual that I linked to earlier, the RC-1 can make a 12-minute loop. I haven’t actually tested this because I haven’t really found a reason to, but we’ll take them at their word. 2) The Minimum Recording Time Is 0.25 Seconds If you’re looking for a basic looper that won’t take up much space on your pedalboard, then the RC-1, RC-3, or RC-5 is probably all you need.

For example, let’s say you have a delay pedal and you want the timing of the delay to match your loops. If your delay pedal is MIDI compatible, you can easily sync it with the RC-300 (the RC-30 also supports MIDI). Choosing between the RC-30 and the RC-300 E. Install and operate counterfeit versions of Software (i.e. software provided by anyone other than Roland or an authorized representative of Roland) on Roland hardware;

The downside of the RC-5 is that it still only uses one footswitch. While you can connect external footswitches, that’s an extra cost that could go towards a bigger unit. Third Party Rights. Other than as expressly set out in this EULA, this EULA does not create any rights for any person who is not a party to it, and no person who is not a party to this EULA may enforce any of its terms or rely on any exclusion or limitation contained in it. While guitarists have been using the RC-30 to play full songs for many years, it seems the RC-10R is now a much better pedal for this purpose. Do you want to be able to run two synchronized loops or will one be enough for you? If you can’t think of any reason to run two loops at the same time, then the RC-3 may have everything you need.The best feature of the RC-1, in my opinion, is the indicator ring. This gives you a great visual indication of the length of your loop and what the looper is currently doing. Expected Battery Life Under Continuous Use (depending on conditions of use): Alkaline – Approx. 3 hours One of the first things that’ll catch your eye on the Boss RC-1 Loop Station is the newly designed loop indicator. With a maximum 12 minutes of stereo recording time, the RC-1 is capable of capturing any extended performance that you can create or imagine!