Azpects Jointing paving Grout - MUSHROOM - 12.5kg Jointing Compound

Product Information

We recommend that sensitive paving, such as Granite, Black Limestone and smooth Sandstone are sealed to protect from staining before using EASY Joint. The result of using EASYJoint, to joint your paving, will be a paving gap that is completely filled without the need for kneeling and compressing the material by hand that will last for years. Suitable for use with outdoor porcelain tiles and other paving materials, all-weather Azpects Easy Joint Grout Mushroom is a cream-coloured powder-based jointing compound that is simply brushed into wet grout joints ready to solidify. Any unused compound can be kept in the tub and submerged in water for use on another project in future.

Some concrete paving is made in moulds and has chamfered edges creating a 'V' shaped joint between two paving slabs, wider at the top than at the bottom. Full instructions on how to joint paving and a demonstration video showing how to joint a patio can be found on this web site. When used correctly and the EASYJoint instructions are followed there will be no staining or framing to the paving. EASY Joint goes hard on contact with air, our EASY Joint needs to sufficiently dry out to allow it to cure properly.We recommend the depth of the joints are kept to a minimum of 20mm, if necessary, remove the old joint and top back up with new jointing compound. EASY Joint will go rock hard when it is exposed to air and allowed to dry - this may take 3 to 5 days (depending on weather).

I bought the product to fill in the gaps between my patio paving slabs after removing the original loose concrete which was 5 years old. Porcelain is impermeable (it will not allow water to pass through it) so follow our instructions for use with porcelain tiles. It’s packed full of useful tips and techniques on the best way to use our range of tiling tools and accessories. When you clean the patio hold the power washer at an angle of about 45⁰ degrees and using a fan spray from no closer than 150mm from the paving joint.Particularly sensitive, porous stone should always be sealed on both sides and all edges as a precaution.