3M IEC C7 Figure of 8 Eight Mains Power Cable Lead - 3 Metre Long (Black)

Product Information

The C7 socket is often commonly known as a cassette or calculator style socket, and can be used in a wide range of small or portable appliances. Appliances can be used in another country easily, with a simple change of the power supply cord (including a connector and a country-specific plug).

Interconnection couplers allow a power supply from a piece of equipment or an appliance to be made available to other equipment or appliances. IEC 60320-1: General Requirements [1] specifies two- pole and two-pole with earth couplers intended for the connection of a mains supply cord to electrical appliances. About this product This Maplin Power Lead IEC C7 Fig 8 2 Pin Angled Plug to UK 3 Pin Plug , also known as a figure 8 lead, is commonly used for low powered appliances such as portable TVs, set-top boxes, and some laptop power supplies. The GW-151614 is a 2m 2-core H03VVH2-F black Mains Power Cord with CEE 7/16 plug to IEC 60320 C7 connection.Established in 1932, our range has steadily expanded over the years and we’re now proud to bring you a comprehensive range of computer and AV connection technologies. I must thank your staff for not only picking up the phone on a Saturday morning, but also being so incredibly knowledgeable, friendly and helpful.

But the feather in your cap was the excellent service yesterday when at 4:25pm, despite believing the deliveries had already been picked up, your sales representative went and checked, just to make sure. The GW-151632 is a 2m 2-core H03VVH2-F black Mains Power Cord with UK mains plug to IEC 60320 C7 connection. Optimise your cable management by increasing the length of power cables, Lindy's range of IEC C7 Power cables are available in 1, 2 and 3m lengths.It is generally possible to use a connector with a higher rated temperature with a lower rated appliance inlet, but the keying feature of the inlet prevents use of a connector with a lower temperature rating.

The power supply cord can be replaced easily if damaged, because it is a standardized part that can be unplugged and re-inserted. For appliance couplers the various coupler outlines are designated using a combination of letters and numbers, e. Australia and New Zealand AS/NZS 3112 (Type I) plug to IEC C7 figure 8 power lead constructed on H03VVH2-F 0.The C17/C18 coupler is often used in audio applications where a floating ground is maintained to eliminate hum caused by ground loops. Connectors" and "appliance outlets" are fitted with socket contacts, and "appliance inlets" and "plug connectors" are fitted with pin contacts. Power cord sets utilizing a C13 connector and an E interconnection plug are commonplace in data centers to provide power from a PDU (power distribution unit) to a server. These power supplies do accept the standard C7 connector, and supported by Apple for non-grounded applications. The general requirements for these items were incorporated into IEC 60320-1 and the standard sheets were moved to IEC 60320-3.