Aqua Coat Clear Wood Grain Filler Pt. by Aqua Coat

Product Information

v=1626969701","options":["Title"],"media":[{"alt":"Fill n Finish Thin","id":22447024275615,"position":1,"preview_image":{"aspect_ratio":1.

This high strength formula is easy to apply with its DIY friendly pourable design, resulting in fine cracks and small voids being quickly repaired. It can be used in joints between window sills, between skirting board and floor, between brickwork, and other similar applications. Northern Ireland, Scottish Highlands and Islands may incur additional carriage charges depending on post code. Resincoat Etch and Clean is the easy way to prepare and clean your concrete floor before painting or resurfacing.Resincoat Exterior Floor Levelling and Resurfacing Compound is a cutting-edge fibre-reinforced system designed to repair and resurface damaged or weakened concrete. Due to its Higher viscosity, gelcoat filler allows you to fill larger voids, gouges, scrapes etc on vertical surfaces without sagging. WATERBORNE AND ECO- FRIENDLY: Our entire line of products are MADE IN THE USA, low VOC, low odor, non-flammable, non-combustible, water-based fast drying, easy to apply, easy sanding, excellent adhesion, water clean up, environmentally friendly.

Put the required quantity of Gelcoat Filler in a plastic mixing cup and add hardener as indicated in the table below and stir thoroughly. Each pack contains filler, hardener, plastic film and a mixing applicator which can be purchased separately thereafter. Sealing Compound for Cracks in Concrete and Plaster: This sealant is perfect for sealing cracks and gaps in concrete, plaster, and other similar surfaces. Resincoat Polyscreed is a three part resin rich polyurethane floor screed ideal for use in industrial settings.

Before using Resincoat Moisture Tolerant Crack Filler, we recommend the area be thoroughly vacuumed to remove any loose material or existing debris which could cause the epoxy formula to set unevenly. Resincoat Epoxy Crack Repair is most suitable for pourable or pressure injection crack repairs in concrete or brickwork, curing to extremely high strengths. Finished surface can be painted or coated to match surrounding area, or the process repeated if further filling is required. NB Colours can be mixed to achieve a perfect match (Do NOT add hardener until the correct colour blend has been achieved).