Joined in 2023 
82 
63 About this deal
Difference between SD – Alcohol 40 – B which Braun is using and casual denatured alcohol is that Braun’s one is good to use in cosmetics and can come in touch with the skin. The page listed below says “Mix packet of concentrate with a 16 oz/500 ml bottle of 90% or greater alcohol (isopropyl, rubbing, ethanol). There are other ways you can clean your electric shaver such as rinsing the shaver head under a running tap. While Braun’s very own solution contains either one or the other, it would probably be safer to stick to using Ethanol. The foils of my Braun razors never got hot during use, so I never had to oil my shavers when using the Cleanerist solution.
A) I was aiming for the 9390 or 9385 as finally I thought I can clean by simply rinsing it down with water unlike the older model which I never dared to use water to avoid rust and malfunction. I worked out the strongest isopropyl alcohol that can be used, if it is too weak it wont evaporate off dry by the next use and if too strong my series 9 cleaning station shows empty.Maybe this is because Braun sometime deploy Isopropyl alcohol rather than the rather less aggressive ethyl alcohol. I also don’t really care about the distant prospect of paint peeling, again, this is an issue with the OEM solution as well. Both have pros and cons and in my opinion you should just go for the one that makes more sense for your needs and ignore the hype. There is some evidence that food grade mineral oil can cause pneumonia when inhaled over a long period of time.
Fortunately, each manual lubrication and subsequent automatic cleaning should gradually improve the lubricating properties of the solution, as the remainder of the lubricant will be washed off by the solution.Do you think the essential oils in the Shaver Shebang will provide enough lubrication without mineral oil? For the guys scared by the IPA (isopropyl alcohol) this is the ONLY alcohol that will completely evaporate and leave no residue behind, so if you are not using your shaver while still wet after cleaning you get no alcohol traces on your skin, only the lemon oils. It’s still a bit unclear to me why using the larger opening when filling it would be preferred; if it helps clean the filter, then yes, it definitely makes sense. It’s significantly more efficient than light mineral oil and it’s close in performance to Andis 5in1. I have filled the ceratridge after cleaining it with 170ml cleaning solution but the red light will not turn off and the cleaning cycle does not start.
Making sure the Rozar product is carefully distributed evenly over the razor head and guard, as this will dissolve the build-up of hairs and debris.That’s why I tend to recommend the ready-made solutions like the one in this article and have been hesitant at posting a DIY solution. Thank you for the tips on how to get it, I will try to source it again as for me it has been a staple for many years. Tip: Using alcohol with a higher concentration will allow the shaving head to dry faster after the cleaning process. But of course, it’s totally up to you if you decide to use it or stick to the manufacturer’s recommendation. What’s even more intriguing is that for the Braun solution, you will have to mix the concentrate with alcohol, not with water.
Great Deal 
New Comment